3104 aluminium sheet for bottle caps is used for the metal caps market. Using a unique rolling technology, Haomei Aluminum supplies aluminium closure sheet ideally suited to manufacture the caps for long neck wine bottles, extremely deep drawn and decorated closures, plus a range of pilfer proof caps for beverage bottles, soft drink, juice, isotonic beverage, energy beverage and other products, for example the 30x60mm specifications are often used in the wine and spirits segment.
3104 aluminum closure sheet can be regard as the ideal material for the production of bottle closure caps, it is suitable for both transparent and non-transparent lacquering, and will not bend during curing process. For long caps requiring deep drawing, Haomei aluminium closure sheets show very low earing, greatly reducing scrap rate for our clients.
Haomei Aluminum's closure sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.
The advantages of 3104 Aluminum Sheet For Caps:
It is light weight;
It is easily and economically recycled;
It has superior barrier qualities;
It has good formability;
It offers a bright finish for decoration.
Specifications of Aluminum Sheet For PP Caps:
Alloy | Temper | Thickness | Width | Length | Coil | Strip | Earing | Diagonal |
3104 | H14, H16, H24, H26 | 0.15~0.25 mm(+/-0.005mm) | 500~1000 mm(+0.5mm, -0mm) | 500~1000 mm(+0.5mm, -0mm) | 500~1000 mm | 20~500 mm | 1 | ≤ 1mm |
Chemical Composition of 3104 Aluminium Sheet For Bottle Cap:
Alloy | Fe | Si | Cu | Mn | Mg | Cr | Zn | Ni | Ti | Other | Al | |
Each | Total | |||||||||||
3104 | 0.7 | 0.6 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | - | 0.1 | 0.05 | 0.15 | Remains |
Mechanical Property for Direct Casting:
Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) |
3104 | H14 | 0.15~0.25 | 150~200 | ≧1 |
The Application of 3104 Aluminum Closure Sheet:
Wine bottle caps, beverage bottles caps, soft drink, juice, isotonic beverage, energy beverage caps, cosmetic caps, can caps, vial seals caps, tear off seal caps, flip-off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, injection vial caps, injection bottle caps.
The cap material process has to go through a number of processes such as hot rolling - cold rolling - annealing - dos oil lubrication -coating - printing- slitting - quality check- packaging, etc.
Wine bottle caps, medical caps, cosmetic caps, soft drink/juice/isotonic/energy beverage caps, cosmetic caps, can caps, vial seals caps, tear off seal caps, flip-off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, injection vial caps, injection bottle caps.
8011/3105 aluminum sheet will be packed by wooden pallet with net weight 0.8-1 ton per each pallet.There are styles of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience.
Plastic movie and brown paper can be protected at customers’ need. Also timber case or timber pallet is adopted to shield products from harm for the duration of the delivery.
20’ GP FCL can full-load 20 tons by putting 2 layers of pallets of products.
