5182 aluminum for caps is an aluminum alloy that is commonly used in the production of can end for beverage cans. This aluminum alloy is ideal for the production of can end materials due to its excellent formability and corrosion resistance. 5182 alloy aluminum is tempered to the H48 state through a heat treatment process that increases the strength of the alloy. 5182 H48 is mostly used for beverage caps with internal pressure, while 5052 H48 is used for beverage and food caps without internal pressure.
Typically 3104 aluminum sheet for caps is used as the raw material for making aluminum can body.
The Specification of Aluminium For Caps Material 5182:
| Aluminum | 5182 |
Width | 150-1900mm |
Thickness | 0.2-0.51mm |
Tensile strength | 360-430Mpa |
Yield strength | ≥310～370 Mpa |
Elongation | ≥6% |
Material temper | H48, H19 |
Packing | aluminum coil roll, aluminum strip |
Typical Products | Can end, Can lids and pull ring |
The Advantages of Alu For Caps Material 5182:
Formability.
One of the key properties of 5182 H48 aluminum coil is formability. The aluminum coil can be molded into a variety of shapes without cracking or tearing. This makes it ideal for producing can lid with complex designs.
Corrosion resistance.
5182 H48 aluminum coil has good corrosion resistance. It can be used in solutions with moisture or slight corrosiveness and is often used to make lids for carbonated beverages.
Light weight.
Aluminum is light in weight. This makes it the best choice for producing can end, and the lightweight design helps reduce the overall weight of beverage cans, which can also reduce production costs.
Strength.
Despite its light weight, 5182 H48 aluminum coil is also known for its strength and durability. Aluminum can withstand the stresses and impacts that can occur during use.
The Application of Aluminum For Caps Material 5182:
Why choose Haomei 5182 Aluminum For Caps Material:
1. Free samples are available, postage is paid by clients. And we will refund the postage to you after purchasing products from our factory.
2. On-time delivery and prompt response. Reply your inquiry in 24 working hours.
3. After receiving the goods, We accept your feedback at first time.
4. Logo or other customized requirements are acceptable.
5. We will search the most economical and reliable shipping company to transport the goods safely.
The cap material process has to go through a number of processes such as hot rolling - cold rolling - annealing - dos oil lubrication -coating - printing- slitting - quality check- packaging, etc.
Wine bottle caps, medical caps, cosmetic caps, soft drink/juice/isotonic/energy beverage caps, cosmetic caps, can caps, vial seals caps, tear off seal caps, flip-off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, injection vial caps, injection bottle caps.
8011/3105 aluminum sheet will be packed by wooden pallet with net weight 0.8-1 ton per each pallet.There are styles of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience.
Plastic movie and brown paper can be protected at customers’ need. Also timber case or timber pallet is adopted to shield products from harm for the duration of the delivery.
20’ GP FCL can full-load 20 tons by putting 2 layers of pallets of products.
